16
31-2000815 Rev. 0
Accessory Installation
TOEKICK (included)
■ Install the toekick after the range has been leveled.
■ Measure the distance between the floor and the
bottom of range .
■ Loosen the two screws on each end. Adjust the
toekick height by sliding the upper and lower pieces
apart to 1/8” less than the measured height.
■ Secure the top and bottom sections by tightening the 2
screws on each end .
■ Push toekick against range leg until clip snaps to legs.
NOTE:
Be sure the toekick snaps securely to the leg .
Bottom
of Toekick
Screw
Top of
Toekick
Push
Push
