CAEN
Electronic Instrumentation
A7030-AG7030 3kV/ 1mA (1.5W) HV Boards
7
Component Specifications
Packaging
All models are single width (5 TE), except A/AG-7030S that are double width (10TE). Height is 6U.
Displays
HV ON LED
lights up as at least one channel is on;
r
ed: positive polarity
;
yellow: negative polarity.
POWER GOOD
Board correctly powered
WARNING
Warning status detected (over current, over/under voltage, trip, external disable)
INTERLOCK LED
Function:
Red LED. Lights up as the board is in INTERLOCK (channel are disabled)
5
.
Trimmers
VMAX:
Function:
it allows to adjust the hardware maximum voltage VMAX common to all the
channels. Its value can be read out via software.
IMAX:
Function:
it allows to adjust the hardware maximum current IMAX common to all the
channels. Its value can be read out via software.
External connections
The specifications of the external connectors are listed in the following subsections.
Series:
A/AG-7030-7030L-7030T
A/AG-7030D-7030S
Output Channels:
Multipin connector Radiall 691803004 type, 52 pin
male (to be mated with Radiall 691802002 [
SCEM
09.41.34.700.2
]
type
6
); see Table below
HV coaxial connectors Radiall
SHVR317580
INTERLOCK (see p. 11):
AMP 280371-2
AMP 280371-2
5
Not available on
A/AG-7030D-7030S
6
Requires 52 pins Radiall 691804300 [
SCEM 09.41.33.830.7
]
type, to be inserted using the insertion/extraction tool
Radiall 282549024 [
SCEM 34.95.17.125.3
] type.
