INTRODUCTION
- qID Technical Information Manual
7
Status
Description
Steady green
Reader is active and battery if fully charged
Blinking green
Reader is in std-by and battery is fully charged
Steady orange
Reader is active and battery is discharging
Blinking orange
Reader is in std-by and battery is discharging
Steady red
Reader is active and battery is almost empty
Blinking red
Reader is in std-by and battery is almost empty
Tab. 1.2: qID R1240IE/IU Power LED Status Table
For more information about qID battery life, please refer to §
POWER CONSUMPTION AND BATTERY LIFE
page 24.
Status
Description
OFF
No connection established
Steady orange
USB cable connected (both to a PC or to the AC power adapter)
Blinking orange
USB communication on going
Steady blue
Bluetooth connected
Blinking blue
Bluetooth communication on going
Tab. 1.3: qID R1240IE/IU USB/Bluetooth LED status table
USB connector
A micro USB Type B socket connector is located in the bottom side of qID R1240IE/IU and can be used to connect the
reader to an USB host port or to an AC/DC battery charger.
In case the reader is connected to a standard USB port the battery charge is performed at 500mA max. (slow charge
mode), in case it is connected to the AC/DC adapter charge current is 1A max. (fast charge mode).
Please consider that when the reader is attached to a PC via USB cable, the battery recharge is active only with device
in stand-by mode (power LED blinking orange).
Accessories
Check for the supplied accessories below:
No. 1 USB cable
No. 1 Power supply
No. 1 strap
Fig. 1.4: qID R1240IE/IU Accessories
