FIRMWARE UPGRADE
- qID Technical Information Manual
19
5
FIRMWARE UPGRADE
The qID R1240IE/IU firmware upgrade can be managed via Bluetooth.
In order to upgrade the firmware, follow the steps below:
1.
Download the
R1240I Suite
zip file from the
qID R1240IE/IU
web page or in the
Software and Firmware Area
of
the CAEN RFID Web Site and unzip it. The zip file contents: the
Flash Loader Demonstrator and the
R1240I_Upgrade
tool
.
2.
Download the R1240IE/IU firmware (the zip folder contents the .bin images) from the
qID R1240IE/IU
web page
or in the
Software and Firmware Area
of the CAEN RFID Web Site
3.
Install the
Flash Loader Demonstrator.
4.
Run the program R1240I_Upgrade, select the reader port to be updated (COM Bluetooth) and press Upgrade
Micro
. Wait a few seconds for the appearance of the dialog box as in Figure STM32Fupdate. Please pay
attention to the fact that
OK
at this stage must not be pressed (it is pressed only at the end of the entire
procedure in step 8).
