POWER CONSUMPTION AND BATTERY LIFE
- qID Technical Information Manual
24
7
POWER CONSUMPTION AND BATTERY
LIFE
Battery Life
The following tables show the values of the battery life of the qID reader in two operating states:
Mod. WR1240IXEAAA - WR1240IXUAAA:
Status
Property
Battery Life
1
Standby blinking
Not discoverable by Bluetooth
5 DAYS
Indication status battery
2
Power on
*
no scanning
Discoverable by Bluetooth
>18h
Indication status battery
* to allow the reader to remain in the
Power on
mode, disable the
autoshutdown
function in the configuration file (please refer to §
Configuration file
page 15).
Mod. WR1240IXEBAA - WR1240IXUBAA:
Status
Property
Battery Life
1
Standby blinking
Not discoverable by Bluetooth
5 DAYS
Indication status battery
2
Power on
*
no scanning
Discoverable by Bluetooth
>12h
Indication status battery
* to allow the reader to remain in the
Power on
mode, disable the
autoshutdown
function in the configuration file (please refer to §
Configuration file
page 15).
When the reader is fully discharged (not blinking), it is recommended to fully charge the reader (until the display shows
the battery level to 100%). If you do not make a complete charge, the battery percentage shown in the reader display
may not be accurate.
When the battery charge level drops below 20%, (reader blinking red), the reader turns off and it has to be put in
charge for at least 15 minutes or until the battery level exceeds 20%.
By default, if the reader is power on, after 5 minutes of inactivity, it enters in standby mode and starts blinking. To
allow the reader to remain in the
Power on
mode (discoverable or Bluetooth connected), disable the
autoshutdown
function in the configuration file (please refer to §
Configuration file
page 15).
For more information about the default configuration of the reader, please refer to §
Configuration file
page 15.
