FAST-Bi-1K5 – User’s Manual
49
•
ADVANCED
–
sub-page
;
•
RESET FAULTS
-
action
;
The access to each sub-page (or action) is necessary to highlight the selected
rectangle by using the encoder or the arrows of the navigation switch and press the
“Enter” button.
The
Reset faults
rectangle, once pressed, resets the status register of the power
supply and sends back to the visualization of the
Home Screen
.
Control Page
The
Control Page
is reachable by selecting the corresponding rectangle from
the
Menu Page
.
The
Control Page
gives access to the main settings of the PS. An example of a
Control Page
visualization is shown in
Figure 36: Control Page.
From this screen it is possible to turn the PS output ON and OFF and to set the
output current or voltage (depending on the regulation type, C.C. or C.V.).
Actual values of output current and output voltage (readbacks) can also be seen
at the bottom line of this page.
Config Page
The
Config Page
is reachable by selecting the corresponding rectangle from the
Menu
Page
. This page allows the user to set the PS modes of operation.
An example of a
Config Page
visualization is shown in
