CAE Healthcare METIman, Руководство пользователя

Страница: 60 / 150

34
Setup
Optional: Connecting a TouchPro Computer to the
Wireless Network
The CAE Healthcare TouchPro computer is pre-configured for use with METIman. If you wish to
supply your own TouchPro computer, use the following instructions to connect the computer
to the METIman network.
Up to two additional computers may be used to run the TouchPro software. The additional
computers must meet the TouchPro Software Specifications mapped out in the Muse and
TouchPro Specifications section of this User Guide on page xii. Follow the steps below to use the
TouchPro software on a TouchPro computer.
Step 1: Set Up METIman
The METIman simulator must be set up and powered on, and the Instructor Workstation must
be powered on and connected to the METIman network. If you have followed the complete
setup procedure, you may proceed to Step 2.
Step 2: Obtain METIman’s IP Address
METIman’s IP address is the same as the IP address used to access the Müse software on the
Instructor Workstation. It can be found in the
Address
field of the web browser on the Müse
Start screen.
The Müse Start Screen
IMPORTANT : The IP address is different for each simulator.
NOTE
: If the
Address
field does not appear, check the view settings of your browser. In Safari,
access the
View
menu and select
Show Toolbar
.
METIman’s
IP address