CAE Healthcare METIman, Руководство пользователя

Страница: 10 / 150

viii
General Use Warnings
Electrical System
Operate the system from a power source with the following rating: 115VAC, 50/60 hertz •
(cycles per second) (e.g. North America, Japan), and 230VAC, 50/60 hertz (cycles per
second) (e.g. Europe)
Do not operate the METIman system in rain. Apply water to the mannequin only in
•
accordance with the supported clinical procedures identified in this User Guide.
Do not allow excess fluids to flow on or into electronic parts.
•
CO
2
Production System
Care must always be taken when using high-pressure equipment. •
Do not disassemble or alter regulator. •
Store CO •
2
canisters in dry location between 32° and 104° F. (0 to 40°C). Do not expose CO
2
canister to heat above 140° F as rupture may occur.
Never point CO
•
2
canister towards your face or someone nearby.
Use only CAE Healthcare specified CO •
2
canisters.
Wear protective gloves and eye protection when removing canister from regulator •
assembly.
Bleeding and Secretion System
DO NOT modify the tank or any assembly component. •
ALWAYS protect eyes, skin and clothing against accidental exposure. •
NEVER exceed 35 strokes while pressurizing the tank. •
ALWAYS read and follow instructions for creating trauma fluids (e.g. blood). NEVER fill the •
tank with more than 6 liters (1.6 gallons) of fluid.
After use, ALWAYS release pressure and clean the tank. DO NOT store liquids in
•
the tank.
ALWAYS release tank pressure before servicing. NEVER transport or ship in a pressurized
•
and/or full state or leave a pressurized tank unattended.
Cautions and Warnings