CADnetwork RenderCube XL, Руководство пользователя

Страница: 3 / 49

Re RenderCube XL
1-3
Layout contents
Connectors/Jumpers/Buttons and switches/Slots Page
1. DDR4 DIMM slots 1-5
2. CPU, CPU optional, water pump, high amp, extension, and chassis fan
connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin W_PUMP; 4-pin
H_AMP_FAN; 5-pin EXT_FAN; 4-pin CHA_FAN1-2)
1-26
3. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V_1; 4-pin
EATX12V_2)
1-27
4. LGA2011-v3 CPU socket 1-4
5. MemOK! button 1-12
6. M.2 Socket 3 1-30
7. U.2 connector (U.2_1-2) 1-24
8. Intel ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34,
SATA 6G_56/SATAEXPRESS_1, SATA6G_78, SATA6G_910)
1-21
9. EZ XMP switch 1-14
10. CPU Over Voltage jumper (3-pin CPU_OV) 1-14
11. DirectKey connector (2-pin DRCT) 1-29
12. System panel connector (20-3 pin PANEL) 1-28
13. Thunderbolt header (5-pin TB_HEADER) 1-30
14. USB 2.0 connectors (10-1 pin USB1112) 1-25
15. SLI/CFX switch 1-13
16. USB 3.0 connectors (20-1 pin USB3_12, USB3_34) 1-23
17. T_Sensor connector (2-pin T_SENSOR1) 1-32
18. RGB Header (4-pin RGB_HEADER) 1-31
19. TPM connector (14-1 pin TPM) 1-29
20. Clear CMOS button (CLR_CMOS) 1-13
21. Q-Code LEDs 1-17
22. Reset button 1-11
23. Power-on button 1-11
24. Front panel audio connector (10-1 pin AAFP) 1-22
25. Digital audio connector (4-1 pin SPDIF_OUT) 1-22