CADnetwork RenderCube XL, Руководство пользователя

Страница: 26 / 49

1-26
Chapter 1: Product Introduction
7. CPU, CPU optional, water pump, high amp, extension, and chassis fan
connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin W_PUMP; 4-pin H_AMP_
FAN; 5-pin EXT_FAN; 4-pin CHA_FAN1-2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• The CPU_FAN, CHA_FAN, and EXT_FAN connectors support the FAN Xpert 3
feature on X99 platform.
• The EXT_FAN connector supports 2 of 5 thermal sensor sources.
• All fan connectors detect the type of fan installed and automatically switches the
control modes. To configure the fan’s control mode, go to Advanced Mode > Monitor
> CPU Q-Fan Control item in BIOS.
• To install more fans, refer to section 2.1.8 Expansion card installation for details.
• For better Q-Fan functions, we recommend using 4-pin PWM fans when you connect
powerful fans (1A or above) onto the H_AMP_FAN connector.
• Ensure to disable Q-Fan functions if you want to connect powerful 3-pin DC fans (1A
or above) onto the H_AMP_FAN connector.
• Connect the fan of your water cooling kit to the CPU_FAN connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure that the CPU fan cable is securely installed to the CPU fan connector.