Cadman 4000M, Руководство оператора по эксплуатации и техническому обслуживанию

Страница: 43 / 48

TR-MAN-4500-A
Operator's Manual - 4000M 4500M
Page 41 of 46
Before Storing
You MUST properly empty and flush your Hard Hose Drag System
before storing the machine for more than one day. Failure to properly
clean out the hose could result in the hose being plugged with
sediment.
Maintenance Item Figure Procedure
Drain and clean out the
hose.
N / A Use a clean-out ball (sold separately) following the
instructions provided with the unit.
OR
Flush with water (minimum of 2000 gallons (7600
liters)) to completely purge the hose.
Clean, inspect and repack
the main chassis wheel
bearing.
N / A
See Walking Beam Assembly on page
Error!
Bookmark not defined.
.
Replace the seals as required
Lubricate all chains N / A Brush each chain with acceptable grease.
(see “Lubricants”)
Check the oil in the indexer
gearbox
Figure 21 Remove the oil plug. Top off or replace the oil as
required. The oil should be level with the bottom of
the plug hole.
(refill capacity = 350mL (12 oz.) approximately)
Table 2 – Required Maintenance - Before Storing
Lubricants
Grease:
Any good grade multi-purpose, waterproof grease is compatible
with the greasing requirements of your
Cadman Hard Hose Reel
.
Gearbox:
SAE 80W or 90W gear oil.
Hydraulic Oil
HYDREX AW-32 HYDRAULIC OIL (p/n 85-LUB-OILAW32)