![background image](http://html1.mh-extra.com/html/cadman/3250xl/3250xl_operator-and-parts-manual_3261647017.webp)
11
2 Adjust the tongue jack for a level frame position during operation.
3 Release the turntable lock and rotate the upper frame to the desired operating position and
re-engage the turntable lock.
5 Shift the transmission lever to the disen-
gage position (arrow).
4 Connect both hydraulic lines from the traveller to
the tractor. Using the tractors hydraulic controls
fully extend both stabilizer jacks
WRONG
RIGHT
WRONG
CAUTION
The upper frame position MUST allow
the hose to be pulled out straight from
the machine. Adjust the upperframe po-
sition if necessary to insure proper un-
reeling of the hose.
CAUTION
Never operate the machine with only one (1) stabilizer leg extended
WARNING
If a rear pull is needed, provisions MUST be made to leave the tractor attached to the
tongue of hte machine. The tractor must be left in gear and the parking brake ingaged.
This provides extra anchoring in addition to the stabilizer legs during the retrieve cycle.
ENGAGE
DISENGAGE
DRIVE SYSTEM DISCONNECT
Содержание 3250XL
