Cadman 3250XL, Руководство оператора и каталог запасных частей

Страница: 12 / 70

6
6 Check the tire pressure and m
aintain from 36-40 PSI .
EVERY 250 HOURS OF USE
Disassemble, clean, inspect and re-pack the gun cart wheel bearings. Replace any defective
components as required.
BEFORE STORING
1 Drain the hose. This is easily done by pulling out all but one (1) coil of hose along a level
path. Remove the drain plug from the gun cart. Use the Honda engine or a tractor PTO shaft
to wind in the hose.
2 Disassemble and clean the variable speed pulley mounted on the engine. Remove the
“moving face” of the pulley. Clean the bronze bushing and shaft of gum and belt dust and lu-
bricate with a thin coat of light oil.
3 Disassemble, clean, inspect and re-pack the main chassis wheel bearings.
4 Lubricate all chains.
5 Prepare the Honda engine for storage. See the storage instructions provided in the Honda
engine manual.
BEFORE START UP (After long term storage)
1 Review this manual to refresh your memory regarding the proper operation of this machine.
2 Fill the fuel system with fresh fuel.
3 Change the oil in both the transmission gearbox and the indexer gearbox.
4 Check and adjust the tire pressure to 36 - 40 PSI .
LUBRICANTS
Grease: Any good grade of multi-purpose, waterproof
grease is acceptable.
Engine Oil: Consult the Honda owners’ manual for
oil recommendations.
Transmission Gearbox: SAE 80W or 90W gear oil.
(see illustration)
Right Angle Gearbox (Indexer) : SAE 80W or 90W
gear oil.
OIL DRAIN
OIL LEVEL
PLUG
CAUTION
DO NOT leave the machine unattended during the hose draining process. Without fluid
pressure present, the hose may flatten slightly causing it to lay improperly on the drum. It
may be necessary to manually adjust the hose position on the hose drum during the drain-
ing process.