Cadillac SRX 2010 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 471

Cadillac SRX 2010 Скачать руководство пользователя страница 60

Seats and Restraints

2-25

3. Be sure that the belt is not

twisted and it lies flat. The
elastic cord must be under the
belt and the guide on top.

{

WARNING

A safety belt that is not properly
worn may not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. The shoulder
belt should go over the shoulder
and across the chest. These parts
of the body are best able to take
belt restraining forces.

4. Buckle, position, and release

the safety belt as described
previously in this section. Make
sure that the shoulder belt
crosses the shoulder.

To remove and store the comfort
guide, squeeze the belt edges
together so that the safety belt can
be removed from the guide. Slide
the guide back into its storage
pocket located on the side of
the seat.

«
...
58
59
60
61
62
...
»

Содержание SRX 2010
























































































































































































































































































































































































































































































Отзывы:

Нет отзывов