Cadillac SRX 2010 Скачать руководство пользователя страница 395

Страница: 395 / 471

9-90

Vehicle Care

Using the Tire Sealant and
Compressor Kit without
Sealant to Inflate a Tire (Not
Punctured)

To use the air compressor to inflate
a tire with air only and not sealant:

Always do a safety check first. See

If a Tire Goes Flat on page 9

‑

1. Remove the tire sealant and

compressor kit from its storage
location. See

Storing the Tire

Sealant and Compressor Kit on
page 9

‑

2. Unwrap the air only hose (G)

and the power plug (H).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (G) onto

the tire valve stem by turning it
clockwise until it is tight.

Содержание SRX 2010
























































































































































































































































































































































































































































































Результаты поиска

Содержание SRX 2010

Отзывы:

Cadillac SRX 2010, Руководство пользователя, Страница: 395 / 471

Результаты поиска

Содержание SRX 2010

Отзывы: