Cadillac SRX 2010 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 471

Cadillac SRX 2010 Скачать руководство пользователя страница 56

Seats and Restraints

2-21

Q: What is wrong with this?

A:

The belt is behind the body.

{

WARNING

You can be seriously injured by
not wearing the lap-shoulder belt
properly. In a crash, you would
not be restrained by the shoulder
belt. Your body could move too
far forward increasing the chance
of head and neck injury. You
might also slide under the lap
belt. The belt force would then be
applied right on the abdomen.
That could cause serious or fatal
injuries. The shoulder belt should
go over the shoulder and across
the chest.

Q: What is wrong with this?

A:

The belt is twisted across
the body.

{

WARNING

You can be seriously injured by a
twisted belt. In a crash, you would
not have the full width of the belt
to spread impact forces. If a belt
is twisted, make it straight so it
can work properly, or ask your
dealer/retailer to fix it.

«
...
54
55
56
57
58
...
»

Содержание SRX 2010
























































































































































































































































































































































































































































































Отзывы:

Нет отзывов