Cadillac SRX 2010 Скачать руководство пользователя страница 400

Страница: 400 / 471

Vehicle Care

9-95

Removing the Flat Tire and
Installing the Spare Tire

Take off the wheel cover or center
cap, if the vehicle has one, to reach
the wheel bolts.

1. Do a safety check before

proceeding. See

If a Tire Goes

Flat on page 9

‑

for more

information.

2. Turn the wheel wrench

counterclockwise to loosen and
remove the wheel nut caps.

Do not try to remove plastic caps
from the cover or center cap.

3. Pull the cover or center cap

away from the wheel. Store the
wheel cover in the cargo area
until you have the flat tire
repaired or replaced.

4. Turn the wheel wrench

counterclockwise to loosen all
the wheel nuts, but do not
remove them yet.

5. Place the jack near the flat tire.

Notice:

Make sure that the jack

lift head is in the correct position
or you may damage your vehicle.
The repairs would not be covered
by your warranty.

6. Position the jack lift head at the

jack location nearest the flat tire.

The jacking location is indicated
by a V-shaped notch in the
plastic molding. The jack must
not be used in any other
position.

Содержание SRX 2010
























































































































































































































































































































































































































































































Результаты поиска

Содержание SRX 2010

Отзывы:

Cadillac SRX 2010, Руководство пользователя, Страница: 400 / 471

Результаты поиска

Содержание SRX 2010

Отзывы: