Black plate (49,1)
Cadillac CTS/CTS-V Owner Manual - 2011
Instruments and Controls
5-49
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.
Remote Door Unlock Feedback
This feature allows you to select the
type of feedback you will receive
when unlocking the vehicle with the
Remote Keyless Entry (RKE) or
keyless access transmitter, or
when the vehicle is automatically
unlocked using the Keyless Unlock
feature. You will not receive
feedback when unlocking the
vehicle with the transmitter if the
doors are open. See
Remote
Keyless Entry (RKE) System
Operation (Key Access) on
page 2
‑
5
or
Remote Keyless Entry
(RKE) System Operation (Keyless
Access) on page 2
‑
7
or
“
Keyless
Unlock
”
later in this section for more
information.
Press the customization button until
Remote Door Unlock appears on
the DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Lights Off:
The exterior lamps will
not flash when you press the unlock
button on the transmitter.
Lights On (default):
The exterior
lamps will flash when you press the
unlock button on the transmitter.
No Change:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.
Exit Lighting
This feature allows you to select
the amount of time you want the
exterior lamps to remain on when
it is dark enough outside. This
happens after the key is turned
from ON/RUN to LOCK/OFF.
Press the customization button
until Exit Lighting appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Off:
The exterior lamps will not
turn on.
10 Seconds (default):
The exterior
lamps will stay on for 10 seconds.
30 Seconds:
The exterior lamps
will stay on for 30 seconds.
2 Minutes:
The exterior lamps will
stay on for two minutes.
No Change:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.