Black plate (48,1)
Cadillac CTS/CTS-V Owner Manual - 2011
5-48
Instruments and Controls
Press the customization button until
Auto Door Unlock appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Off:
None of the doors will
automatically unlock.
Driver Only At Off:
Only the driver
door will unlock when the ignition is
turned off.
All At Off (default on Manual
Transmission):
All of the doors
will unlock when the ignition is
turned off.
All In Park (default on Automatic
Transmission) (Automatic
Transmission Only):
All of the
doors will unlock when the vehicle is
shifted into P (Park).
No Change:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.
Remote Door Lock Feedback
This feature allows you to select the
type of feedback you will receive
when locking the vehicle with the
Remote Keyless Entry (RKE) or
keyless access transmitter, or when
the vehicle is automatically locked
using the Keyless Locking feature.
You will not receive feedback
when locking the vehicle with the
transmitter if the doors are open.
See
Remote Keyless Entry (RKE)
System Operation (Key Access) on
page 2
‑
5
or
Remote Keyless Entry
(RKE) System Operation (Keyless
Access) on page 2
‑
7
or
“
Keyless
Locking
”
later in this section for
more information.
Press the customization button until
Remote Door Lock appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
menu up/down button to scroll
through the following settings:
Off:
There will be no feedback
when you press the lock button on
the transmitter.
Lights Only:
The exterior lamps
will flash when you press the lock
button on the transmitter.
Horn Only:
The horn will sound on
the second press of the lock button
on the transmitter.
Horn & Lights (default):
The
exterior lamps will flash when
you press the lock button on the
transmitter, and the horn will sound
when the lock button is pressed
again within five seconds of the
previous command.
No Change:
No change will be
made to this feature. The current
setting will remain.