Cadex C4000 SERIES, Руководство пользователя

Страница: 76 / 152

•
OPTION-P with dead
back-up battery
Custom Programs
If the back-up battery has been removed or is no
longer functional, OPTION-P cannot retain the
Custom Program Code. In this case the function will
be as per "Without OPTION-P".
2. Typical Applications
Discharge only for NiCd
battery Manufacturers-of NiCd batteries claim that it is best to
store a NiCd in a discharged state. Airfreight companies
prefer to transport batteries in discharged rather than
charged state.
Program
Discharge to 1Vlcell, then stop (no trickle charge).
Custom-Code
1000-0000-0000-0000:00
Exit Phase
[00] O=no cycle; O=done, no trickle charge .
Phase
1 [1000] 1=discharge; O=no cycle; OO=skip.
Phase
2-4 OOOO-OOOO-OOOO=skip to Exit Phase.
•
Deep-discharge NiCd
battery
When storing NiCd batteries for a prolonged time, it is
best to apply a discharge followed by a secondary slow
discharge (recondition).
Program
Discharge to 1 VIc ell , followed by recondition, then stop
(no trickle charge).
Custom-Code
1300-0000-0000-0000:00
Phase
1 [1300] 1=discharge; 3=recondition; OO=skip TG.
Phase
2-4 OOOO=OOOO-OOOO=skip to Exit Phase.
Exit Phase
[00] O=no cycle; O=done, no trickle charge.
•
Long-term battery
reliability
A manufacturer must verify the performance of a battery
by cycling it at a given charge and discharge rate until
its capacity drops below the user-selectable
Target
Capacity. The number of cycles are counted and
displayed (refer to "1. Setting up Custom Program" in
this chapter) .
9-5