Cadex C4000 SERIES, Руководство пользователя

Страница: 11 / 152

Basic Operation
1. Power Up
Start-up messages
Global Display
Battery Adapters
Before connecting the C4000, check for the correct line
voltage. The line voltage label is located on the bottom
of the unit. The on-oft switch is on the back panel.
When the power is turned on, the display (LCD)
message briefly reads:
:,gM9!:"(ll~'.::.B.~::.eEElmgrff:!~nISi:.:::.:
:):;i }:;:),:::::::
:MeBstQN#::alQOfR:::::n::QIAGNQSTIGS}PA$$}~;tjj: :::',::::: .
The display then shows the Target Capacity setting
briefly, then switches to the Global Display.
If the
Battery Adapters are installed in Stations 1, 2 & 3, but
not 4, the display shows:
The analyzer is now ready to service batteries in
Stations 1, 2 & 3.
Note It is advised to install a Battery Adapter in all
vacant stations. This prevents damage by static
electricity.
The batteries interface with the C4000 through Battery
Adapters. You can install, replace and reprogram
the
adapters while other batteries are being serviced. For
more details on the various types of Battery Adapters,
refer to CHAPTER 6 -
BATTERY ADAPTERS.
2-2
•
•
•