Cadex C4000 SERIES, Руководство пользователя

Страница: 70 / 152

•
•
•
Verifying calibration
(battery holder only)
Calibration notes
Utilities
Press the Display Key for the Station to start calibration.
While calibrating, the LCD read:
At the end of calibration, a triple beep is heard and the
LCD reads:
If the leads had opened during the test, the LCD reads:
"CALIBRATION ERROR, PRESS ANY KEY". The
calibration must be repeated.
After calibration, remove the shunt and insert the
battery. When in discharge, measure the battery voltage
with a voltmeter (DVM type). If the battery is made of a
number of cells, calculate the average cell voltage by
dividing the measured voltage by the number of cells .
Compare this reading with the average cell voltage
displayed on the LCD. If the readings differ by more
than SOmV, repeat the calibration.
Calibration is only applicable to discharge.
It is absolutely necessary that the contact resistance
between the battery terminals is as low as possible
when calibrating. Alligator clips or light gauge jumper
wires for connection is not recommended.
There is no shock hazard when touching the bare wires
coming off the Battery Adapter, nor is there any hazard
in shorting the Battery Adapter leads.
It is recommended to re-calibrate if the Battery Adapter
is moved form one Station to another.
Caution
• Do not short
the battery at any time.
• Do not short
the Battery Adapter leads to the side
plates of the C4000 .
8-7