Cadex C4000 SERIES, Руководство пользователя

Страница: 42 / 152

•
•
Code 24
VERY LOW VOLTAGE
(ZONE 1 TIME-OUT)
Code 25
LOW VOLT (ZONE
PLATEAU TIMER)
Code 26
LOW VOLT (ZONE 1
NEGATIVE SLOPE)
Code 27
LOW VOLTAGE (ZONE
1 TIME-OUT)
Fault Codes
Reason Charge time-out in Zone 1 after 10 minutes
1.
Battery has shorted cells.
Battery type Code 24 is most common with NiCd and
NiMH batteries.
What to do Discard battery.
Reason Charge termination in Zone 1 through Plateau
Timer. Battery has shorted cells. Remaining cells accept
charge but are mismatched,
preventing Negative Slope
at full charge.
Battery type Code 25 is most common with NiCd
batteries
What to do Discard battery.
Reason Charge termination in Zone 1 through
Negative Slope. The correct battery voltage cannot be
obtained due to shorted cells. Remaining cells accept
charge and appear to be matched .
Battery type Code 26 is most common with NiCd
batteries.
What to do Discard battery.
Reason Charge termination in Zone 1 through time-
out-timer. The correct voltage cannot be obtained in the
allotted time frame. Fast-charge is terminated by timer.
Possible reasons:
• Shorted cells
• Battery capacity too large for set charge current
• Number of cells not entered correctly
Battery type Code 27 is most common with NiCd
batteries
•
What to do Check correct C-Code setting. If all fails,
discard battery .
1
Time indicated is based on a C-Rate of 1
5-7