Cadel AQUOS3 16 Скачать руководство пользователя страница 3

Страница: 3 / 56

IDROSTUFE A PELLET

MANUAL SIMBOLOGY

USER

AUTHORISED TECHNICIAN

(ONLY to interpret or the Stove-manufacturer or the Authorized Techni-

cian of Technical Assistance Service approved by the Stove-manufacturer)

SPECIALIZED STOVE-REPAIRER

CAUTION:

READ CAREFULLY THE NOTE

CAUTION:

DANGER OR IRREVERSIBLE DAMAGE POSSIBILITY

• The icons with the stylized figures indicates whom the subject dealt in the paragraph is addressed to (between the User and/

or the Authorized Technician and/or the Specialized Stove-repairer).

• WARNING symbols indicates an important note.

PACKAGING AND HANDLING

2.1

PACKAGING

• The packaging is made up of recyclable cardboard boxes according to RESY standards, recyclable expanded polystyrene inserts

and wooden pallets.

• All packaging materials can be re-used for a similar use or eventually discharged as waste assimilable to the municipal solid

ones, in accordance with current regulations.

• After having removed the packaging please assure you about the integrity of the product.

2.2

STOVE HANDLING

Both whether the stove is packed or not it is necessary to observe the following instructions for handling and transporting the

stove from its sale point to its installation point and for any future movements:

• The stove must be handled with idoneous means paying attention to the existing safety regulations;

• do not turn the stove upside down and/or upset it on one side, but keep it in vertical position or as accorded with the construc-

tor instructions;

• if the stove is made up of ceramic, stone, glass or any particularly fragile material components, all must be moved with the

utmost care.

CHIMNEY FLUE

3.1

INTRODUCTION

This chapter about the Chimney Flue has been drawn up in cooperation with Assocosma (www.assocosma.org) and is based on

European Standards (EN 15287 - EN 13384 - EN 1856 - EN 1443) and UNI 10683:2012.

It provides instructions for a good and correct execution of the chimney flue but it does not absolutely replace the current stan-

dards which the qualified manufacturer/installer should comply with.

Содержание AQUOS3 16

























































Результаты поиска

Содержание AQUOS3 16

Отзывы:

Похожие инструкции для AQUOS3 16

Бренды по названию

Популярные бренды

Cadel AQUOS3 16, Руководство по установке

Результаты поиска

Содержание AQUOS3 16

Отзывы:

Похожие инструкции для AQUOS3 16

Бренды по названию

Популярные бренды