Cadac CDC seven, Руководство пользователя по оборудованию

Страница: 21 / 50

Revision 1 2017 CDC seven
21
17. Monitor faders – three 100 mm (non-motorised) faders controlling: i) the
headphones output, ii) left and right stereo monitor outputs, iii) the mono
wedge feed. These outputs are available on the rear panel of the control
surface.
NOTE: The functions of the four faders [16] and [17] are reassignable in software;
the descriptions above are of the default assignments.
18. Metering – a 20-segment LED dual bargraph meter is fitted adjacent
to each of the four faders in the fader bay. These have the same
characteristics as the meters in the Channel section.
19. OLED displays – these indicate the functions currently assigned to the
four master faders – by default, these will be Phones, Monitor LR,
Wedge and LCR.
20. LCR ON button – when this button is unlit, the main LCR output is muted.
21. LCR SEL button – pressing this button changes the Main Screen (and the
faders, SEL and ON buttons below the Main Screen) to Busses A Layer,
but with the three channels of the master output (L, R and C) at the left,
and Busses 1 to 13 to their right. This allows gain trim, EQ, dynamics
and other functions to be applied to the individual channels of the master
output, as well as providing access to the master faders.
22. Monitor outputs ON buttons – master ON buttons for each of the monitor
outputs.
23. Monitor outputs SEL buttons – these become functional if the monitor
faders are reassigned for other uses.
24. SOLO buttons – perform an AFL (after-fade listen) function. SIP mode
is also available, selected from the Solo Control page. As well as the
master modes, the CDC seven also features ‘momentary’ and ‘latching’
solo operation as per the input channels.