68
2 seconds. The LCD will show at the
upper left-hand corner.
2. To temporarily unlock the selection
dial, press the selection dial or
once. Alternatively, press and hold any
group button to select a group for power
level adjustment. The LCD will show to
indicate the temporary unlock status.
The dial will be locked again when no
button or dial is pressed or turned in
2 seconds.
3. Temporary unlock can be enabled or
disabled in the <TEMPORARY UNLOCK> menu.
4. To permanently unlock the selection
dial, press and hold the selection dial
or for 2 seconds.
Note:
The short-cut for adjusting the power
level of a single group by simultaneously
pressing a group button and turning the
dial (see Section 12.1.1) will be unaffected.
In the main screen of the V6 IIs TX, pressing
or the push-in selection dial once will
change it to one of the following modes:
•
Zoom Control <ZOOM>: controlling the zoom
level of the connected flashes and the
16.3
Swap
Control
All manuals and user guides at all-guides.com