60
15. Advanced Operations
The V6 IIs is equipped with an auto-focus
(AF) assist LED and it is capable of emitting
an AF-assist light in accordance with the
camera’s command. The power of the AF-assist
light can be adjusted in either TX or RX
mode to best suit your working environment.
To conf igure the AF-assist LED:
1. Switch on the V6 IIs in TX or RX mode.
Please note that the set up will be
applied to that operating mode only.
2. Press
and turn the selection dial to
<PREFERENCES>. Press
.
3. Turn the selection dial to <AF-ASSIST>
and press
. You will then be able to
turn on and select the power of the
AF-assist LED.
Each V6 IIs will memorize the AF-assist
light setting in the TX and RX
independently. In a setup when the AF-assist
light of both the TX and RX are turned on,
the AF-assist light on both devices will
light up simultaneously when the camera
commands the TX to do so.
15.1
Auto-
focus
Assist
Light
All manuals and user guides at all-guides.com