38
level. Press the group button briefly to
leave the group selection.
2. Short cut: Press and hold the group
button and turn the selection dial
simultaneously. Once the adjustment is
f inished, release the group button.
You may also adjust the power level of the
on-camera flash
that you have mounted on the
V6 IIs in TX mode.
1. Make sure that the TTL pass-through mode
has not been activated (see Section 8).
2. Press and turn the selection dial
simultaneously to change the power level
of the on-camera flash.
12.1.2 Multi-Group Power Adjustment
To adjust the power level of ALL active
groups, simply turn the selection dial left
or right to the desired power level.
Note:
The power level of the on-camera flash
is not affected by the multi-group
adjustment.
All manuals and user guides at all-guides.com