62
Note:
If two TXs are triggering at the same
time, the RXs may interfere with each
other. Avoid triggering at the same time.
Every V6 IIs is equipped with a delay timer
that is conf igurable in either the TX or RX
mode. The delay timer delays the trigger
response for the time period set. If you
wish to f
ire the flash a bit later than the
f irst curtain sync to create a different
light effect (e.g., to achieve a second
curtain sync), set an appropriate delay time
from 1 millisecond to 99 seconds.
To set up the delay timer:
1. Switch on the V6 IIs in TX or RX mode and
press . Turn the selection dial to
<FUNCTIONS> and press
. Turn the
selection dial to <DELAY> and press
.
15.3
Delay
Timer
All manuals and user guides at all-guides.com