
Figure 39.
Figure 40.
Figure 41.
17. Rotor Removal: Cut 2.5 inches from the rotor bolt. Slot
the end of the bolt to suit a flat blade screwdriver. Slide
the rotor bolt back through the rotor and use a screw-
driver to screw it into the crankshaft. Use a 3” M12x1.75
bolt to screw into rotor. Apply torque to the 3” M12x1.75
bolt until taper breaks. See Figure 43.
Figure 42.
11. Remove Engine: Using a 13mm socket, remove the two
engine mount nuts with ground wires. See Figure 43.
Figure 43.
Page 161
DISASSEMBLY
sEctioN 6.1
maJor DisassEmBlY
Part 6
0G9266revA.indd 161
10/15/2008 11:28:32 AM
Содержание FOR BYPASS AND FAN POWERED HUMIDIFIERS
Страница 56: ...Page 54 NOTES 0G9266revA indd 54 10 15 2008 11 27 21 AM...
Страница 189: ...Page 187 0G9266revA indd 187 10 15 2008 11 28 53 AM...
Страница 190: ...Page 188 0G9266revA indd 188 10 15 2008 11 28 53 AM...
Страница 191: ...0G9266revA indd 189 10 15 2008 11 28 53 AM...