58
9.3
RFID mode
If the APP mode is set, the charging process is started by using the RFID card for authentication.
To use the RFID mode please follow the steps in the following table.
The RFID mode is active when the FREE mode is disabled.
The APP mode will work even when the RFID mode is set.
Step
Description
Picture
1
The vehicle is connected to the
charger.
The front LED (AREA1) change
its colour to blue indicating the
plug-in status of the vehicle.
Note: the APP home page
background colour changes to
blue accordingly
2
To start charging, hold the RFID
card near to the AREA 2 part of
the charger
3
To stop charging, hold the RFID
card near to the AREA 2 part of
the charger again
Note: use the same card
already used for starting the
process
Note: the RFID card must
be registered on the charger
before being used (see
“RFID
card registration” paragraph)
