17
Passo
Descrizione
Foto
4
Put the stand in the vertical
position and use the M10 nuts
together with flat washers to
secure the stand base to the
concrete platform.
An M6x20 bolt needs to be
added to the stainless-steel nut
at the bottom of the stand to
provide ground protection.
5
Remove the wall mounted
metal plate that comes with
the charger. Then remove the
four M6x20 bolts on the stand
hanging plate. Finally align the
holes of the two metal plates
and fix them using the M6x20
bolts.
Fix the cable support, if
available (CASE C).
