21
Each area has its own specific function, as summarized in the following table:
Area
Tipo
Descrizione
AREA1
LED indicator
A LED belt is placed all around the charger and assumes different
colours to indicate the current status (see table below)
AREA2
RFID area
RFID card tap area
8.1.2
Status LED indicator (AREA1)
The following table presents the status information displayed by the frontal LED:
Colour
Blinking mode
Status
White
No blinking
Power on self-test: the charger is switching on and performing the power on tests
Green
Blinking slowly
Stand-By mode: the charger is on, available for charging
Blue
Fast blinking
Pause during the charging process
Blue
No blinking
Charging mode setup: the charger is preparing to start the charging process
Blue
Blinking slowly
Charging mode: the charging process is ongoing
Red
Error mode: errors are detected by the internal protections (details can be found
in the APP)
8.1.3
RFID card area (AREA2)
This is the area where the RFID card is operative. The RFID card is used to start or stop the
charging process. In order to perform these operations, the user should lay the card near to the
two rectangles on the front side.
8.2
Mobile APP
The
EV EVO
mobile APP can be connected to the charger through the Bluetooth interface. The APP
is used to completely manage the charger (EV EVO is the name of the application).
The APP can be downloaded from the most common digital stores:
