CONVERTING THE CO2
TO A 4-LINE KITE
THE CONVERSION OF THE CO2 FROM 2 TO 4 LINES IS A SIMPLE PROCESS OF
REMOVING THE BRIDLE AND YOU WILL NEED:
• a second set of similar length flying lines
• a center leader line
• a centerline adjustment system.
The Cabrinha PowerDrive Kit has everything you need to convert
your Ergonmic Control bar to a 4-line system.
See the Black tip section of this manual for help with bar setup and
tuning in 4-line mode.
REMOVING THE BRIDLE
1) Remove each rear line from attachment points.
2) Loosen the larks head where the front (cross bridle line) attaches to
the rear line. Slide the cross bridle off of the rear line on each side.
3) Detach V1 and V2 from attachment points on each side.
4) The kite is now ready to be flown as a 4-line kite. The attachment
points for V1 and V2 are now the hang points for the front lines and
back lines respectively. Follow the instructions for 4-line set up in the
Black Tip section of this manual.
(
NOTE
: You may remove the rear line attachment point bridles when
flying the kite as a 4-line.)
2 TO 4-LINE CONVERSION
CO2
CONT’
