manualshive.com logo in svg

Cabrinha CO2, Руководство пользователя

Поделиться
Скачать
Cabrinha CO2 Скачать руководство пользователя страница 14

INFLATING THE KITE - LEADING EDGE

CO2

CONT’

INFLATING THE LEADING EDGE

All Cabrinha kites feature the 2 part high volume
Airlock valve. The upper section is the inflation cap.
The lower section is the release valve.

•

Make sure that the release valve is seated firmly by turning clock-
wise. Do not over tighten the valve when the kite is not inflated.
Doing so may damage the bladder.

•

Open the inflation cap by screwing it counter clockwise. Insert pump
(use the adapter tubing if using a hand pump) and inflate the lead-
ing edge (L.E.).

•

When the L.E. is fully inflated, remove pump nozzle and screw the
inflation cap back on. Check that the release valve is secure.

•

Do not under-inflate Leading Edge. Proper inflation will make it diffi-
cult but not impossible to bend the ends of the kite in. If it is very
easy to do this, the leading edge is under-inflated. Kite should be
firm enough that if you turn it onto its back, wing tips should extend
into the air and kite should retain its bowed shape.

AIRLOCK
INFLATION 
CAP OPEN

PROPERLY INFLATED
KITE

AIRLOCK - CLOSED

Содержание CO2









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды