manualshive.com logo in svg

Cabrinha CO2, Руководство пользователя

Поделиться
Скачать
Cabrinha CO2 Скачать руководство пользователя страница 13

INFLATING THE STRUTS

• Unroll your kite, with the STRUTS facing up.

• Make sure your back is to the wind and that the leading edge of the

kite is closest to your body. Secure the wingtips with sand to keep the
kite from flapping.

•

Partially

inflate the center strut, then the two middle struts, followed

by the end struts.

• When inflating, hold the pump at a perpendicular angle to the kite valve.

Use one hand to hold the valve steady and the other hand to operate
the pump. This will help maintain the life of the internal bladder.

• When all struts are partially inflated, go back to each strut, making

sure the internal bladders are lined up correctly. 

• Confirm that the corners under the leading edge are able to fully inflate.

Lightly push air around in the bladders until the corners are free and
correctly lined up.

• Now fully inflate each strut. 

• Secure the valve plug and attach the Velcro covering across each valve.

• Do not over-inflate the struts, if it is fairly solid to the touch, it is fully

inflated.

• Do not under-inflate the struts, this will cause poor performance and

relaunching problems.

INFLATING THE KITE - STRUTS

CO2

Use one hand to hold the

valve steady and the other

hand to operate the pump

Secure velcro covering 

over each strut valve

Содержание CO2









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды