ATTACHING THE STEERING
LINES TO THE BRIDLE
•
Carry the kite to the end of the flying lines furthest from your
control bar. Make sure the leading edge is facing into the
wind.
•
Turn the kite on its back (struts facing toward the sky).
•
Have your launch partner secure the kite by holding it or
weigh it down with sand or sand bags.
•
Ckeck the bridle and free it of any twists and knots.
•
Attach the RED larks head on your STEERING LINE over
the RED knot on the BRIDLE.
•
Attach the GREEN larks head on your STEERING LINE over
the BLUE knot on the BRIDLE.
•
Make sure that the bridle knots are secure by pulling on
each of them to double check.
•
Check each PULLEY to make sure each one is turned
upward (each pulley will face downward once the kite is fly-
ing).
•
Also, check each PULLEY to make sure the bridle lines
are not trapped between the strut and the back part of
the pulley and the kite material.
•
Turn the kite over and secure it.
BRIDLE LINES
CO2
PULLEY
ATTACH BRIDLE
W/ LARKS HEADS
