Cabletron Systems TRMM-2, Руководство пользователя

Страница: 42 / 82

INSTALLATION
2-12
2.7.2 Assigning A Host IP Address
You must assign an IP address to the SNMP Agent (management agent) in
the TRMM-2 if you want to manage the module remotely. Assign an IP
address as follows:
1.
Consult the Network Administrator for an IP address.
2. Enter the Main Menu screen as described in Section 2.7.1 .
3.
Select the
SETUP MENU
screen.
4.
Enter the
SYSTEM LEVEL
screen.
5. Select the
Host IP address
field and type the appropriate IP
address. Press the Enter key to accept the entry.
6.
Select
SAVE
at the bottom of the screen and press the Enter key.
The TRMM-2 does a warm reboot that does not effect network traffic.
2.7.3 Inputting The STATION Port Interface
Connection Location
To execute physical control (such as ring security and beacon recovery)
over a second Token Ring, you must install the STATION port interface
connection according to the guidelines defined in Appendix B, and
provide a physical location (slot and port number) of the STATION port
interface connection.
1.
Enter the
System Level
screen as described in Section 2.7.2 .
2. Select the
STN Assignment
toggle fields.
3.
Toggle through the values in each STN Assignment field to set the slot
and port numbers (to identify the location of the STATION port
interface connection). Press the Enter key to accept the values.
NOTE
Whenever the STATION port interface cable connection is
installed or moved, the following procedure must be performed.
See
Section 2.6 for STATION port interface cable connection
instructions.