Cabletron Systems SSIM-R2-02, Инструкция по установке и эксплуатации

Страница: 23 / 48

16
SSIM-R2-02/SSIM-R8-02 HSTR SmartStack Interface Modules Installation and User Guide Console Configuration
Port Configuration - HSTR Ports
To configure an HSTR port on the SSIM-Rx-02, select
Port Configuration
from the
Configuration
menu and enter the port number of the HSTR port (21,
22, 25, or 26). The following menu appears:
The following items are shown:
Enabled
Detemines whether the port is enabled, Yes or No. When the port is disabled, the
LINK LED will blink. This is also the case, if the port has been auto-disabled, see
“Cfg Loss Threshold” and “Cfg Loss Sampling Interval” on page 17” .
Default: Yes.
Status
Display only. Shows the current status of the port. Can be one of the following:
Value Meaning
Auto Disabled The port has been auto disabled.
Down The port has been disabled and the MAC protocol is
disconnected.
Table 3. HSTR Port Configuration: Status Values