Cabletron Systems SSIM-R2-02, Инструкция по установке и эксплуатации

Страница: 21 / 48

14
SSIM-R2-02/SSIM-R8-02 HSTR SmartStack Interface Modules Installation and User Guide Console Configuration
Ring Number Restriction
➽
Note: All CRFs that a HSTR port has virtual ports in must have the same ring
number.
Thus, the ring number is a per-port parameter and not a per-virtual port parameter.
This convention will also be implemented by HSTR switches and is expected to be
adopted by the IEEE. To see the importance of this, consider the implication of not
having this restriction. If it was not in effect, the meaning of the RIF would be
ambiguous and depend on to which VLAN the frame was sent. It would thus be
incomprehensible to equipment that does not understand VLAN tags.
When a virtual port is created in a VLAN this restriction might in some cases
require that a new CRF be created to avoid changing existing ring numbers.
General Guidelines
To work within the console menus, follow these guidelines:
•
To select a menu item, use the arrow keys to move the “highlight” over the
selection, then press
Enter
.
•
If you need to specify additional information for any item—for example,
selecting Yes or No or supplying a value—a prompt appears on the screen. If
you want to exit the prompt without changing the value, press
Esc .
•
In most cases, new values are saved when you select
Return
.
•
The term “More” means there is more information than what is displayed on
that screen. Selecting
More
and pressing
Enter
displays the next screen of
information. If the screen is a one-screen display, selecting
More
will update
the screen.
•
The term “Port” refers to the number of a specific port on a SmartStack STS16-
20RM.
•
“Index” refers to the numerical order of a list.
•
To return to the main menu from any screen within the menus, press
Ctrl-P.
Note that any changes made to the screen you were in are not saved. To return
to the greeting screen, press
Ctrl-B
from any screen.
•
To refresh the console panel at any time, press Ctrl-L .
•
If you are administering switches in a stack, many of the console screens will
prompt for a box number. Enter the number of the box you want to administer
to continue. The box that you are physically connected to is highlighted.