Cabletron Systems SmartSwitch 8-slot, Руководство пользователя

Страница: 88 / 150

Chapter 6: Routing Policy Configuration Guide
6 - 16 SSR User Reference Manual
complex filter requirements, then use the second method.
After you create one or more building blocks, they are tied together by the iprouter
policy export command.
To create route export policies, enter the following command in Configure mode:
The
<exp-dest-id>
is the identifier of the export-destination which determines
where the routes are to be exported. If no routes to a particular destination are to be
exported, then no additional parameters are required.
The
<exp-src-id>
, if specified, is the identifier of the export-source which
determines the source of the exported routes. If a export-policy for a given export-
destination has more than one export-source, then the ip-router policy export
destination <exp-dest-id> command should be repeated for each
<exp-src-id>
.
The
<filter-id>
, if specified, is the identifer of the route-filter associated with this
export-policy. If there is more than one route-filter for any export-destination and
export-source combination, then the ip-router policy export destination <exp-dest-id>
source <exp-src-id> command should be repeated for each
<filter-id>
.
Creating an Export Destination
To create an export destination, enter one the following commands in Configure mode:
Create an export policy.
ip-router policy export destination <exp-dest-id>
[source <exp-src-id> [filter <filter-id>|[network
<ipAddr-mask> [exact|refines|between <low-high>]
[metric <number>|restrict]]]]
Create a RIP export destination.
ip-router policy create rip-export-
destination <
name>
Create an OSPF export destination.
ip-router policy create ospf-export-
destination <
name>