Cabletron Systems SmartSwitch 8-slot, Руководство пользователя

Страница: 28 / 150

Chapter 1: SmartSwitch Router Product Overview
1 - 10 SSR User Reference Manual
sequence.
Loading System Image Software
By default, the SSR boots using the system image software installed on the Control
Module’s PCMCIA flash card. To upgrade the system software and boot using the
upgraded image, use the following procedure.
1. Display the current boot settings by entering the following command:
system show version
Here is an example:
ctron-ssr-1# system show version
Software Information
Software Version : 1.0
Copyright : Copyright (c) 1996-1998 Cabletron Systems, Inc.
Image Information : Version 1.0, built on Fri Mar 20 19:28:49 1998
Image Boot Location: file:/pc-flash/boot/ssr8/
Note: In this example, the location “pc-flash” indicates that the SSR is set to use
the factory-installed software on the flash card.
2. Copy the software upgrade you want to install onto a TFTP server that the SSR
can access. (Use the
ping
command to verify that the SSR can reach the TFTP
server.)
3. Enter the following command to copy the software upgrade onto the PCMCIA
flash card in the Control Module:
system image add <IPaddr-of-TFTP-host> <image-file-name>
Here is an example:
ctron-ssr-1# system image add 10.50.11.12 ssr8000
Downloading image 'ssr8000' from host '10.50.11.12'
to local image ssr8000 (takes about 3 minutes)
kernel: 100%
Image checksum validated.
Image added.
4. Enter the following command to list the images on the PCMCIA flash card and
verify that the new image is on the card:
system image list
Here is an example: