Cabletron Systems SmartSwitch 8-slot, Руководство пользователя

Страница: 45 / 150

Chapter 2: Bridging Configuration Guide
SSR User Reference Manual 2 - 9
Define the Forward Delay Interval
The forward delay interval is the amount of time spent listening for topology change
information after an interface has been activated for bridging and before forwarding
actually begins.
To change the default interval setting, enter the following command in Configure
mode:
Define the Maximum Age
If a bridge does not hear BPDUs from the root bridge within a specified interval, it
assumes that the network has changed and recomputes the spanning-tree topology.
To change the default interval setting, enter the following command in Configure
mode:
Configuring a Port or Protocol based VLAN
To create a port or protocol based VLAN, perform the following steps in the Configure
mode.
1. Create a port or protocol based VLAN
2. Add physical ports to a VLAN
Create a Port or Protocol Based VLAN
To create a VLAN, perform the following command in the Configure mode.
Adding Ports to a VLAN
To add ports to a VLAN, perform the following command in the Configure mode.
Set the default of the forward delay
interval.
stp set bridging forward-delay
<num>
Change the amount of time a bridge
will wait to hear BPDUs from the root
bridge.
stp set bridging max-age
<num>
Create a VLAN.
vlan create
<vlan-name> <type>
id
<num>
Add ports to a VLAN.
vlan add ports
<port-list>
to
<vlan-name>