INSTALLATION
Page 2 - 13
These parameters are displayed in the “Range of
Available Values” box to the right of the configuration
menu.
Restore Default Configuration
Restores the configuration of your E2200 adapter to
factory default parameters.
Manual Configuration
This selection allows you to manually change
configuration parameters in the event of a conflict, or to
fine tune your system.
• Select Automatic Configuration, and in the
configuration menu, select Plug and Play, and set the
option to NO.
• If necessary, change any additional configuration
options, i.e., Mode, Media, Boot PROM, or Memory
Access. QuickSet will check each system parameter,
search for conflicts, and flag them with an asterisk.
QuickSet will change conflicting assignments.
• When system parameters are satisfactorily configured,
Exit QuickSet and install E2200 network drivers.
• Reboot your system. Your E2200 network adapter is
ready for use.
NOTE:
Mode, Media, Boot PROM, and Memory Access
parameters can be set from either Automatic or Manual
Configuration Mode.
NOTE
