INSTALLATION
Page 2 - 11
2.6.2
Plug and Play System Configuration
Versions 2.02 (and above) of QuickSet are compatible with “Plug
and Play” personal computers. Plug and Play is most often
implemented in the computer’s system BIOS or the operating
system proper (as in Microsoft Windows 95™). The QuickSet
Configuration Utility Menu Map, Figure 2-7, below, describes the
features and options of QuickSet graphically.
Figure 2-7. QuickSet Menu Map
If you wish to run the QuickSet Configuration
Utility, you must make sure that no E22XX network
drivers are loaded. Make sure drivers are not being
autoloaded by your system.
If you encounter problems running QuickSet, power
cycle your computer. You may load E22XX drivers
after configuration is completed.
!
CAUTION
Exit to
DOS
Prompt
Save Changes
Don't Save Changes
View Only
No Changes
CONFIGURATION
Range of
Available
Values
Appears in
this box
* indicates
conflicting
setting
Plug and Play . . . . . . . . . . . . . YES
MODE . . . . . . . . . . . Standard Ethernet
I/O Port . . . . . . . . . . . . . . 300
Interrupt . . . . . . . . . . . . . . 5
DMA . . . . . . . . . . . . . . . . 3
Media . . . . . . . . . . . . . Auto Select
Boot PROM . . . . . . . . . . No Boot PROM
Memory Access . . . . . . . . . Fast
ETHERNET ADDRESS
00-00-AA-BB-CC-DD
Default Configuration
Manual Configuration
Restore
Automatic Configuration
SETUP VIEW EXIT
SET E22XX CONFIGURATION
Make Changes
Find
Free
Settings
