INSTALLATION
Page 2 - 5
•
Remove the protective backplate from the selected slot, as
shown in Figure 2-3. Loosen the screw holding the backplate in
place over the selected slot, and slide the backplate out of the
slot.
Figure 2-3. Backplate Detail
•
Orient the adapter (see Figure 2-4) so the computer bus edge
connector is lined up with the expansion slot and the Ethernet
ports face out the back of the computer as shown in Figure 2-4.
•
Align the adapter with the expansion slot and firmly press, but
do not force, the adapter into the slot.
•
Reinstall the screw that attaches the bracket to the rear panel of
the computer. Replace the computer cover, and reconnect all
the cables.
•
Connect the adapter’s primary media port to a twisted pair
segment (see Section 2.4, Connecting Primary Media, on the
following page).
Screw
Backplate
Socket
