CBU-NM
User Manual
ii
80-60100000-02
10–2
this, place the mouse cursor over a toolbar button, or pop up a menu and
drag the selection over the menu commands.
The on-line help also gives information about these commands. To
obtain help, press Shift-F1, and the cursor will change shape. Select a
command, and help will appear for that command.
The format of each entry in this chapter is:
10.x Menu | Command
Purpose:
A description of what the command does.
*Toolbar button:
Shows the icon that represents the command on the
toolbar.
Menu keys:
Tells you which keys to press if you want to access a
command using the keyboard. These are the same
letters as are underlined in the heading. To invoke a
command, press Alt, then the
Menu letter, then the
Command letter. For example, to add a new device
you could type Alt, N, N. It does not matter about
capitals.
*Speed Menu:
Specifies a window. If you click the right mouse
button over this window, you will see a menu from
which you can select the command. This may be
easier than using the keys or the menu bar.
*To enable:
Some commands may not be available at all times
because they depend on another part of the
program. Any conditions on using the command will
be explained in this paragraph.
* These entries may not be included if the command
•
has no toolbar button
•
is not accessible from a Speed Menu
•
is always enabled
