Cablescan 90 Series, Руководство по установке

Страница: 11 / 57

Series 90 Setup Manual Page 1
SERIES 90 FAMILY OF TEST SYSTEMS
SERIES 90/SERIES 90HV
The Cablescan Series 90 (Figure 1) is a high-speed continuity tester that you also can use as an
assembly aid and a final interconnect verifier. The Series 90HV (Figure 2) is a high-voltage
model that typically is used for testing quality of insulation and quality of harness connections.
All test and build features of the standard Series 90 are incorporated in the Series 90HV. You
can apply either model to the test and assembly of:
•
Cables and harness assemblies
•
Back planes
•
Bare printed circuit boards
. . . with up to 131,072 test points (standard Series 90), or 47,104 points (Series 90HV).
You normally operate the Series 90/90HV through a keyboard and monitor, which communicate
with Windows-based system controller. You can create and store your test/build programs on
disk. You also can obtain and store test programs through the learn-known-good process, or you
can import test programs from other sources.
SERIES 90L4/SERIES 90H8
The Cablescan Series 90L4 and Series 90H8 (Figure 3) are low and high-voltage models,
respectively, that are used on small assemblies and require use of your PC as the control device.
All test and build features of the Series 90 and 90HV are incorporated in the Series 90L4 and
Series 90H8. You can apply them to the test and assembly of:
•
Cables and harness assemblies
•
Back planes
•
Bare printed circuit boards
. . . with up to 512 test points.
You operate the Series 90L4/90H8 through your own PC, which serves as the controller, running
on Cablescan-supplied software. You can create and store your test/build programs on disk.
You also can obtain and store test programs through the learn-known-good process, or you can
import test programs from other sources.