Cablescan 4000C, Инструкция по эксплуатации

Страница: 45 / 83

Model 4000C Instruction Manual Page 35
Print-Related Commands
The following list contains all print-related commands. The printout also will appear on the
monitor during printing, or the monitor only if no printer is connected. Verify the Printer power
switch is on and the Printer Select light is on. At the system prompt, enter the two- letter
command, followed by an ENTER.
Tester
Function 2-letter
Command Command
Description
Print Error PE
P rint E rrors
Print Wire List PW P rint W ire List
Print User List PU P rint U ser List
- PS P rint S orted
- PO P rint O ptions
- P
P rinter on/off toggle
- FF F orm F eed
- LF
L ine F eed
- SH S et H eading
Print Wire List - PW
Same as PRINT WIRE LIST selected from the Front Panel menu. See section on Controls and
Displays for more details.
Print Error List - PE
Same as ERROR LIST key on the Front Panel. See section on Controls and Displays for more
details.
Print User Notation List - PU
Prints a list of user notations that have been assigned to the scanner test points.
Print Sorted Wire List - PS
Prints a wire list of all continuity assignments in memory. This list is sorted from the sequential
wire list and is stored in ascending order for use during shorts test. The printout is therefore
listed in ascending order, with multiple circuits grouped together.
Print Options List - PO
Prints a list of the current user-settable options.
Printer On/Off - P
This command enables the printer to print whatever is typed and what is displayed on the
keyboard/CRT Terminal. This command is primarily a diagnostic function, and in certain modes
of operation it may print non-valid data. To enable the printer, type P followed by an ENTER.
To disable the printer, except for the print functions, type P followed by an ENTER again.
Line Feed - LF
Entering this command will cause the printer to advance one line.
Form Feed - FF