CABASSE RIALTO, Руководство пользователя

Страница: 36 / 42

36
USE / SYNCHRONIZE WITH A TV SET
TV MODE
1. Please connect the primary speaker to the TV with the TV cable, please connect the primary
speaker to the secondary speaker with the optical cable.
2. If you find latency between the picture and sound of your speakers, please try the time delay or
audio synchronization feature of your TV set if available.
3. If the TV icon does not appear on the primary speaker display, the TV connection is not found.
Check your connections or replace the TV cable.
4. With this connection, you can control the volume of your system via your TV remote control.
ADJUSTING THE LATENCY OF YOUR SPEAKERS
Choose the coaxial SPDIF solution.
There are 3 modes that will allow you to adapt the latency of your audio system to your needs:
- HIFI: this mode is the default setting of your speaker, the audio stream is redistributed by a
primary speaker to secondary speakers. The latency is then more than 1 second to ensure the time
necessary for the flow to pass through the network and be redistributed to the other speakers
with perfect stereo synchronization
- TV/DIRECT: This mode does not use the network. The sound is broadcast directly from the audio
input to each speaker. Therefore, the sound must be distributed to each device in the zone and
all must have the same configuration. An additional optical switch is required for an optical
connection and this mode must be configured in the settings of each speaker.
- Low latency: This mode is based on the streaming of one master speaker to the others. The
latency is less than 1 second, the stability of this setting will depend on the quality of the network
and the bandwidth. If one of your speakers cuts out, it is generally due to a lack of buffering data, a
wired Ethernet connection is preferable to a wireless connection.
If this setting remains unstable, we advise you to configure the direct TV mode so as not to depend
on your network.
DEACTIVATION OF THE SPEAKERS OF THE TELEVISION
Turn on the TV, open the TV menu, and look for a tab such as Audio, Sound or Speakers. Use the
menu function to switch off the TV speakers. This menu item may for example be labeled «Speaker
On / Off» for speakers on / off. If this function does not exist, bring the TV sound volume with the
TV remote control to the minimum level.
ACTIVATION OF THE OPTICAL OUTPUT OF THE TELEVISION
If there is no sound with an optical connection, set the chosen optical output in the TV menu if
necessary.